Protect your cabin or cuddy cabin boat with a quality Southern Storm boat cover from The Cover Shop. Designed for V-hull cabin boats with bow rails, these semi-custom covers provide practical protection from New Zealand sun, rain, dirt and general weather exposure.
Southern Storm cabin boat covers are made from marine-grade 600D solution-dyed polyester with a polyurethane coating for improved UV and water resistance. The fabric is durable, breathable and designed for outdoor marine use, helping moisture escape from underneath the cover while protecting your boat from the elements.
Read our field test results comparing boat covers.
Please measure your boat before ordering. Boat length alone should not be used to select your cover size.
Read our How to Size Your Boat Cover guide before choosing your size.
Measure your boat as shown in our sizing guide and add 0.3m to the measured length. If your measurement falls between two cover sizes, we recommend choosing the next size up.
In some cases, the seam tape may lift or peel over time. This is a cosmetic issue only and does not affect the normal performance of the cover.
Boat sizes below are a guide only. Always measure your boat before ordering.
| Cover Size | Approximate Boat Size Guide |
|---|---|
| 5.66m × 3.53m | 4.5m – 4.7m |
| 6.23m × 3.53m | 5.0m – 5.4m |
| 6.87m × 4.00m | 5.5m – 6.0m |
| 7.58m × 4.00m | 6.3m – 6.6m |
| 8.27m × 4.00m | 6.7m – 7.2m |
If you are unsure which size will best suit your cabin boat, please contact The Cover Shop and we will be happy to help.
Southern Storm cabin boat covers are designed for V-hull cabin and cuddy cabin boats with bow rails. The correct fit will depend on the overall length, width, cabin height and shape of your boat.
Measure your boat using our sizing guide rather than relying on the stated boat length alone. Use the actual cover dimensions as your main reference and add 0.3m to the measured boat length. If your boat falls between two sizes, we recommend choosing the next size up.
Yes. These covers are specifically designed for cabin and cuddy cabin boats with bow rails. However, rail height and overall boat shape can vary, so measuring your boat carefully before ordering is important.
Yes. Southern Storm cabin boat covers are designed for outdoor storage and provide UV and water resistance for everyday protection from sun, rain, dirt and general weather exposure.
Southern Storm covers are designed to provide waterproof protection in normal weather conditions, while remaining breathable.
Cabin boats can trap moisture under a cover, especially around the cockpit and cabin area. A breathable fabric allows moisture and condensation to escape more easily, helping reduce moisture build-up beneath the cover.
No. Cabin boats of the same length can vary significantly in beam, cabin height, windscreen shape, bow rail height and deck layout. Always measure your boat before ordering.
The cover should be fitted with enough support and tension so rainwater can run off rather than collect in low areas. Avoid leaving large unsupported sections of fabric where water can pool.
Yes. Southern Storm cabin boat covers are supplied with tie-down straps and quick-release buckles to help secure the cover around the boat.
Southern Storm cabin boat covers are made from marine-grade 600D solution-dyed polyester with a polyurethane coating. The fabric is selected for durability, UV resistance, water resistance and breathability.
The Cover Shop has many years of experience supplying boat covers for New Zealand conditions. Our Southern Storm range is selected with durability, UV exposure, weather resistance and practical everyday use in mind.
Also available:
Please note: Actual product colours may vary slightly from those shown due to lighting, photography, screen settings and manufacturing variations.