$15 flat rate NZ shipping on orders over $200

Boat Covers for Hardtop/ Bimini Top

58 reviews

Boat Covers for Hardtops or Bimini Tops.

Latest design complete with side zips so you can easily enter the boat without having to undo the back of the boat cover and crawl underneath.

This Southern Storm boat cover is one of the best semi custom covers in the market with its solution dyed marine fabric which provides increased protection against NZ's harsh UV rays, giving superior colour consistency, vibrant colours, and excellent everyday clean-ability.  Our boat covers are also coated with a polyurethane coating which provides protection against abrasion and increases its water resistance. They are made from a specific breathable fabric which allows moisture to escape and helps to prevent mould and mildew.

Read our field test results comparing covers.

Boat Cover Features

-   Side zips for easy access.  Please be aware that due to different boat designs and hardtop positions that the zips may not be in the best position on some boats.

-   High strength fabric engineered for extra durability and maximum weather protection. Perfect for outdoor storage.

-   Stylish protection for your boat.

-   Protects your boat from UV rays, fading and sun damage.

-   Water resistant > 1200kpa, breathable and mildew resistant.

-   Supplied with tie down straps and quick release buckles.

-   Marine grade 100% solution dyed 600D polyester with PU coating.

-   Reinforced hem with sewn in rope to adjust tightness against the hull.

-   Double stitched interlock seams with rot proof thread.

We are trialing seam tape on some of our covers to see how it copes with the extreme weather of NZ. Please note the tape may come off but it does not effect the cover in anyway.

NOTE: Boat size is a guide only and should not be used for ordering. Please use cover size and follow our simple instructions on our blog "how to measure your boat."

Cover Size     -   Boat Size Guide (see note above)

7.8m x 5.0m   -   5.0m - 5.25m

8.5m x 5.0m   -   5.9m - 6.4m

9.0m x 5.4m   -   6.6m - 7.0m

9.4m x 5.7m   -   7.2m - 7.6m

10.0m x 6.0m  -  7.8m - 8.2m

10.6m x 6.0m  -  8.4m - 8.8m

 Measure your boat as per the picture and add 0.3m to the length.  It is best to go to the next size up if between sizes.

Also available:

Cabin boat covers.

Runabout boat covers.

Customer Reviews
4.9 Based on 58 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Ryan H.
New Zealand New Zealand

Happy with the cover.

I have never had a full cover on any of the boats I have owned and this is a nice change. Deck area is covered and dry now. Boat is parked under a pohutukawa tree and no more issues with its leaves etc fouling the boat. Time will tell how long it lasts but a good start thanks.

Steve W.
New Zealand New Zealand

Boat cover

Fitted out Haines Hunter 7m perfectly, great quality too. Thanks

New Zealand New Zealand

Cover for Haines Hunter SF600

I recently purchased a Haines Hunter SF600 and bought a cover to fit over it with the full bimini up. The 1st one I ordered was a bit too big (9 x 5.4), but Covershop swapped it for the next size down (8.5 x 5) and it fits just like a custom-made one...very impressed with the fit...and the service! Thanks Guys

Jared M.
New Zealand New Zealand

Hard Top Cover

Great fit to 560 Lazercraft with Bimini. Good quality material and very fast service.

Paul G.
New Zealand New Zealand

Brought a cover for me Marco striker 625 . Covers it perfectly and really like the zips on the side . Water runs off the cover highly recommend

Kristeen W.
New Zealand New Zealand

Boat Cover for Larson 240 Cabrio

We are very happy with the cover, our boat is 24 feet long plus a swim board and the cover fits perfectly. It appears to be really well made with plenty of tiedown points and a great fit.

New Zealand New Zealand

Trailer boat cover

We recently purchased online a 9x5 cover for our boat. Perfect size to cover our 6m boat plus bimini, bowsprit and motor. Excellent, efficient service and quick delivery.

C E.
New Zealand New Zealand

Great Product, easy to use, Fits well

2019 Sea Ray 265 Sundancer

New Zealand New Zealand

Great cover !

Great cover, only just purchased, so I am unable to see the jurability of the cover at this stage, but appears to be a better product than the previous cover from another company.

Malcolm M.
New Zealand New Zealand

8.5 x 5 m Black

The 8.5 x 5 m cover arrived promptly and adequately covers my Buccaneer 565 Sportsman with Bimini and rocket launcher including the bowsprit mounted anchor and 115 HP Outboard. Looks a little ugly at the coaming below the rocket launcher but it does cover the boat well. I fitted 32 mm waste water pvc 90 degree bend pipe fittings to relieve the strain on the cover at the rod holders on the rocket launcher. The internal seam cover strip has fallen off on one seam after a couple of weeks. I will see how long the other seam covers last. So far all good. Malcolm McGowan - Whitianga

New Zealand New Zealand

9x5.4m Cover for Hardtop/Bimini Top

I recently purchased the 9x5.4m for my Reflex 635 and it fits perfectly. The service was fantastic, it was shipped the same day I purchased.

trevor r.
New Zealand New Zealand

7.8 x 5.0m Hardtop

Great service from The Cover Shop. Purchased 7.8 x 5.0m Hardtop cover for a 5.5 Surtees Workmate. Fits well and covers the motor cowling with the roof up. Easy to install and looks like it will do the job. Cheers Trev.

John B.
New Zealand New Zealand

Boat Covers for Hardtop/ Bimini Top

I bought this cover for a Marco Max 500. It fits brilliantly. Delivery was fast, and the whole process was easy. Well done The Covershop.

Richard B.
New Zealand New Zealand

Excellent Fit

This cover 9.4 x 5.7m fits my 6.5m Sportfisher HT Lazercraft that well you would swear it was custom made. I absolutely recommend the covershop, great quality and speedy delivery. Thanks

Craig P.
New Zealand New Zealand

Good fit 9x5.4

Bought the 9x5.4 to fit over a 585 Hardtop Profile. Fit is good including right over the motor. Would fit a 6 or 6.15 Profile hardtop.

Related Items