303 Fabric Guard is recommended by fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 High Tech Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.
303 High Tech Fabric Guard and 303 Fabric Guard are the same product. The new labels don't include "high tech".
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.
CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
Product label may differ to image shown.
Used this on my convertible top...it’s brilliant, water just beads off... roof looks great, highly recommended. The ordering on this site was very easy, shipping was prompt and communication excellent. Thanks!
Easy to apply but it needs time to see how effective the protection is. We used this product on the Bimini covers on our Oliver Royale 12m launch